Structure
Analog standard electronic truck scale weighing by load-bearing units, weighing and weighing sensors monitor the three basic modules; according to the different needs of the user can choose to buy other external devices to form a variety of configurations, including: computers, wide-based printers, large-screen display units, multi-purpose regulated power supply and power outlet, control the camera, card reader, computer networking, etc. (see detailed weight management software).
Scales using structural steel welding van, U type steel structure, the overall high strength, torsional performance, and high-precision weighing sensor bridge and superior performance, feature-rich interface shows a variety of weighing instruments, such as a common component that weighting system.
It features high accuracy, reliability, and a high degree of intelligent and adaptable, convenient installation maintenance and replacement of instrumentation does not require re-calibration. National economic construction can be widely used in various industries, for bulk goods vehicles weighing materials measurement and management.
Technical parameters
◆ AD conversion mode: Σ-Δ converter AD conversion manner: Σ-Δ converter mode
◆ A / D conversion rate: 200 times / sec
◆ A / D conversion sub-degree: 24bit
◆ Input signal range:-30mV ~ 30mV
◆ Input Sensitivity: ≥ 1μV / d
◆ Sensor for Bridge Power: DC5V; I ≤ 150mA;
◆ Connect the sensor number: 8, connected to the sensor 350Ω or 700Ω sensor 16
◆ Sensor connections: 6-wire system, automatic long-term compensation from ≤ 50 meters
◆ test sub-degree: 3000
◆ the largest outside the sub-degree: 50,000
◆ the largest within the resolution: 1,000,000
◆ points value: 1/2/5/10/20/50/100 optional
◆ Display: 7 LED digital tube, seven state indicator, power indicator light 3
◆ display range: -325000 ~ 325000 (e = 10)
◆ Clock: Real-time clock, automatic leap year, Leap from the impact of power
|
Model |
Table size scales Desk |
Max(t) |
Indexinge(Kg) |
|
SCS-1 |
1×1.5 |
1.5×2 |
1 |
0.2 |
|
SCS-5 |
2.0×3 |
2.0×4 |
1.5×2 |
5 |
0.5 |
|
SCS-10 |
3.0×7 |
2.5×6 |
3.0×6 |
10 |
1 |
|
SCS-20 |
3.0×7 |
2.5×6 |
3.0×6 |
20 |
2 |
|
SCS-40 |
3.0×14 |
3.0×12 |
3.0×10 |
40 |
5 |
|
SCS-60 |
3.2×14 |
3.0×16 |
3.0×12 |
60 |
5 |
|
SCS-80 |
3.2×18 |
3.2×18 |
3.0×16 |
80 |
5 |
|
SCS-100 |
3.4×18 |
3.2×18 |
3.2×16 |
100 |
5 |
|
SCS-120 |
3.4×18 |
3.2×18 |
3.4×21 |
120 |
10 |
|
SCS-150 |
3.4×18 |
3.4×21 |
3.5×21 |
150 |
10 |
|
SCS-200 |
3.4×18 |
3.4×21 |
3.5×21 |
200 |
20 |
Note: The above specifications for the conventional models, special models according to customer demand for custom design
Weighing Software:
|
