Structure
Analog to digital truck scale truck scale: value in the simulation based on the vehicle, the replacement of junction box and weighing instruments can achieve quasi-digital truck scale weighing system. The system is in the traditional resistance strain sensor based on the combination of modern microelectronic technology, micro-computer technology integration and development of a new type of electronic weighing technology. It consists of analog sensors, digital conversion module, is composed of three parts weighing instruments. KAD-8 data acquisition system using a number of integrated A / D chip, each sensor independently of the analog signal into digital signal, processed by the single chip, each sensor to the load independent instruments, computer, etc. general analog sensor with a digital sensor characteristics.
Features
◆ output digital signal, anti-interference ability, transmission distance, to resolve the connection of analog sensors and errors due to temperature changes in line impedance measurement errors caused by
◆ in the instrument or computer can be a direct view of each sensor set, and can also be a separate sensor for each measurement, greatly facilitate the installation and debugging and fault-site maintenance
◆ instrument or computer can adjust the angle of each sensor coefficient, complete body angle adjustment scale
◆ independent sampling of each sensor, so the sensor is low, different scale, different output sensitivity, a different impedance, zero point output of different sensors can be used on the same scale
◆ box without potentiometer, the temperature compensation characteristics of the sensor will not change, but also long-term stability of the system to improve the poor
|
Model |
Table size scales Desk |
Max(t) |
Indexinge(Kg) |
|
SCS-1 |
1×1.5 |
1.5×2 |
1 |
0.2 |
|
SCS-5 |
2.0×3 |
2.0×4 |
1.5×2 |
5 |
0.5 |
|
SCS-10 |
3.0×7 |
2.5×6 |
3.0×6 |
10 |
1 |
|
SCS-20 |
3.0×7 |
2.5×6 |
3.0×6 |
20 |
2 |
|
SCS-40 |
3.0×14 |
3.0×12 |
3.0×10 |
40 |
5 |
|
SCS-60 |
3.2×14 |
3.0×16 |
3.0×12 |
60 |
5 |
|
SCS-80 |
3.2×18 |
3.2×18 |
3.0×16 |
80 |
5 |
|
SCS-100 |
3.4×18 |
3.2×18 |
3.2×16 |
100 |
5 |
|
SCS-120 |
3.4×18 |
3.2×18 |
3.4×21 |
120 |
10 |
|
SCS-150 |
3.4×18 |
3.4×21 |
3.5×21 |
150 |
10 |
|
SCS-200 |
3.4×18 |
3.4×21 |
3.5×21 |
200 |
20 |
Note: The above is the size of conventional models, special sizes can be custom designed customer needs
Loadometer Weighing management software Download trial: 官方下载
|
